Hub-type shaper cutters DIN 5480

High-quality shaper cutters from Liebherr are available within a very short time. Their impressive quality makes longer tool life possible. The standard tools are manufactured from ASP2052 / S390 material with an Alcrona Pro coating. The range of stock tools also offers customers great flexibility. Below you will find the available models in the category hub-type shaper cutters DIN 5480. The stock tools are available within a short space of time, and include a measurement report.
Module 1.50 - 10.00 mm
Number of teeth 10 - 58
Pressure angle 30 °
Bore d3 19.00 - 44.45 mm

Variants

Table is scrollable
Module (mm) Number of teeth d0 (mm) Bore d3 (mm) d1 (mm) b1 (mm) Z2min Stock number Inquiries
1.50 30 45.00 19.00 40.00 36.00 42 W 615 081 02
1.75 30 52.00 19.00 45.00 41.00 42 W 617 581 02
1.75 58 101.00 44.45 90.00 46.00 78 W 617 571 02
2.00 26 52.00 19.00 45.00 41.00 36 W 620 081 02
2.00 38 76.00 31.75 70.00 41.00 53 W 620 061 02
2.00 50 100.00 44.45 90.00 46.00 70 W 620 071 02
2.50 30 75.00 31.75 68.00 41.00 42 W 625 061 02
2.50 40 100.00 44.45 90.00 46.00 56 W 625 071 02
3.00 18 54.00 19.00 45.00 43.00 25 W 630 081 02
3.00 26 78.00 31.75 70.00 43.00 36 W 630 061 02
3.00 34 102.00 44.45 92.00 46.00 48 W 630 071 02
4.00 14 56.00 19.00 46.00 46.00 20 W 640 081 02
4.00 20 80.00 31.75 70.00 46.00 28 W 640 061 02
4.00 26 104.00 44.45 90.00 46.00 36 W 640 071 02
5.00 12 60.00 19.00 48.00 46.00 18 W 650 081 02
5.00 16 80.00 31.75 68.00 46.00 22 W 650 061 02
5.00 20 100.00 44.45 88.00 46.00 28 W 650 071 02
6.00 12 72.00 31.75 60.00 46.00 18 W 660 061 02
6.00 18 108.00 44.45 95.00 46.00 25 W 660 071 02
8.00 10 80.00 31.75 65.00 46.00 16 W 680 061 02
8.00 14 112.00 44.45 95.00 46.00 20 W 680 071 02
10.00 10 100.00 44.45 82.00 46.00 16 W 600 061 02
To the inquiry list