You are hereLiebherr Group: Products & Services for Other countries
The PHS 3000 Allround contains all the proven qualities of the PHS family, just like its smaller siblings the PHS 800 and PHS 1500, the system automatically supplies machine tools with machine pallets. A flexible combination of standardized modules enables the user to uniquely configure their systems and allow for machine tools, setup stations, pallet storage and further modules to be added for expansion and scalability in all directions.
Large telescopic stroke for heavy parts
In the new weight class, large and heavy parts weighing up to three tons of transport load can be automated – for example, valves for pipelines, axle components for heavy commercial vehicles or structural parts for the aerospace industry. For the PHS 3000 Allround, a particularly robust telescoping stroke was developed. This also retains the special advantage of frontal access; the operator is able to access the machine at all times through a door between the PHS and the machine. This ensures minimal downtime and high productivity, since the system continues to run when decoupling individual machines for manual activities or maintenance work. The shelf magazine on the PHS 3000 Allround also offers pallet storage for up to three levels.
|PHS 3000 Allround||Technical Data|
|Max. transport weight||3,000 kg|
|Max. collision circle diameter*||Ø 1,400 mm / Ø 1,700 mm|
|Max. machine pallet size||800 x 800 / 1,000 x 1,000 mm|
|Shelf levels||2 to 3|
|Max. workpiece height (including pallet)||1,600 mm (2 shelf levels)|
|*The collision circle diameter designates the maximum permitted deviations of the machine pallet, including workpiece clamping and workpiece.|
The cell control follows the material flow and manages orders so intelligently that even small batch sizes can be elegantly conveyed through the system.
Particularly economical for heavy loads
The intelligent software makes automation profitable even with low batch sizes: “The cell control follows the material flow and manages orders so intelligently that even small batch sizes can be elegantly conveyed through the system”, explains Agnes Schauppel, Product Manager of Automation Systems at Liebherr.
The possibility of setup during the machining process and unmanned manufacturing in multi-shift operation increases the machine runtime by up to 90 percent and reduces the unit costs by up to 40 percent; overall, increasing the capacity by two and a half times. Because of the higher machine investment when machining large components, the automated handling is particularly profitable for parts with a high volume or weight. A pallet handling automation system increases the manufacturing capacity without additional machines and can therefore even cut investment costs.