LTM 1650-8.1 Mobile crane

The LTM 1650-8.1 is designed to deliver maximum performance. The new Liebherr 650-tonne crane has two telescopic boom versions – it is available with a 54 or 80 metre telescopic boom. With an axle load of 12 tonnes, the 8-axle crane can be driven on public roads with its 54 metre telescopic boom and front supports. To minimise the set-up time, the rear supports are installed as complete support boxes and connected using quick-release couplings. VarioBallast® enables the ballast radius to be infinitely varied using a simple hydraulic slewing mechanism.
Max. load capacity 700 t
Telescopic boom 80 m
Max. hoist height 153 m
Max. radius 110 m
Number of axles 8

Technical data

Max. load capacity 700 t
at radius 3.00 m
Telescopic boom from 16.70 m
Telescopic boom up to 80.00 m
Lattice jib from 6.0 m
Lattice jib up to 91.0 m
Drive engine/make Liebherr
Drive engine 8-Zylinder-Diesel
Drive engine/power 505 kW
Number of axles 8
Drive/Steering standard 16 x 8 x 16
Driving speed 85.00 km/h
Total ballast 175.00 t

Downloads

Technology

VarioBase®

VarioBase®

VarioBase makes the crane’s support system variable. It enables each outrigger to be extended to a different length. This enhances safety – particularly in constricted spaces. And what's more, the crane’s lifting capacities are significantly increased, particularly over the outriggers and depending on the configuration.

ECOdrive

ECOdrive

ECOdrive makes the mobile crane significantly more comfortable and quieter by reducing the engine speed. Faster gearshifting delivers greater dynamic and traction offroad. On the road, the torque from the Liebherr diesel engine is used efficiently to minimise fuel consumption.

Single-engine concept

Single-engine concept

Take one engine out to increase lifting capacity. Or more accurately – the superstructure is powered by the undercarriage engine. Gear shafts are routed from the distributor gear in the substructure via two mitre gears to the pump distributor gear in the superstructure. That enables us to remove one engine – and we use this to increase the crane’s lifting capacity.

ECOmode

ECOmode

ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The LICCON 2 control system calculates the perfect engine speed for the diesel engine.

VarioBallast® (hydraulic)

VarioBallast® (hydraulic)

The ballast radius can be infinitely varied using a simple hydraulic slewing mechanism. The radius can be reduced in constricted conditions or increased if a higher lifting capacity is required. This significantly increases the crane’s flexibility.

Automatic erection of the luffing jib

Automatic erection of the luffing jib

We can provide a support function for erecting the luffing jib on larger LICCON 2 cranes. Activating the automatic erection system in the LICCON crane control system ensures that the adjustment winch is automatically adjusted by the control system as the telescopic boom is luffed.

Videos

The maximum on 8 axles

The maximum on 8 axles

Call up video