LTM 1450-8.1 Mobile crane

The LTM 1450-8.1 features a very long yet powerful 85 metre telescopic boom. The Liebherr 8-axle crane has been designed for worldwide cost-effective mobility and fast, easy set-up on site, which has resulted in the LTM 1450-8.1 being capable of travelling on public roads with a 12-tonne axle load including its 85 metre long telescopic boom, all supports and a complete hoist winch. This means that it can be quickly prepared for use once it reaches the site.
Max. load capacity 450 t
Telescopic boom 85 m
Max. hoist height 131 m
Max. radius 100 m
Number of axles 8

Features

Webspecial

Webspecial

The LTM 1450-8.1 features a very long yet powerful 279 ft/ 85 m telescopic boom. The Liebherr 8-axle crane has been designed for worldwide cost-effective mobility and fast, easy set-up on site, which has resulted in the LTM 1450-8.1 being capable of travelling on public roads with a 26,400 lbs/ 12-tonne axle load including its 279 ft/ 85 meter long telescopic boom, all supports and a complete hoist winch. more

Technical data

Max. load capacity 450 t
at radius 3.00 m
Telescopic boom from 16.10 m
Telescopic boom up to 85.00 m
Lattice jib from 7.0 m
Lattice jib up to 84.0 m
Drive engine/make Liebherr
Drive engine 8-Zylinder-Diesel
Drive engine/power 505 kW
Number of axles 8
Drive/Steering standard 16 x 8 x 16
Driving speed 85.00 km/h
Total ballast 134.00 t

Downloads

Technology

VarioBase®

VarioBase®

VarioBase makes the crane’s support system variable. It enables each outrigger to be extended to a different length. This enhances safety – particularly in constricted spaces. And what's more, the crane’s lifting capacities are significantly increased, particularly over the outriggers and depending on the configuration.

Single-engine concept

Single-engine concept

Take one engine out to increase lifting capacity. Or more accurately – the superstructure is powered by the undercarriage engine. Gear shafts are routed from the distributor gear in the substructure via two mitre gears to the pump distributor gear in the superstructure. That enables us to remove one engine – and we use this to increase the crane’s lifting capacity.

ECOmode

ECOmode

ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The LICCON 2 control system calculates the perfect engine speed for the diesel engine.

VarioBallast® (hydraulic)

VarioBallast® (hydraulic)

The ballast radius can be infinitely varied using a simple hydraulic slewing mechanism. The radius can be reduced in constricted conditions or increased if a higher lifting capacity is required. This significantly increases the crane’s flexibility.

Automatic erection of the luffing jib

Automatic erection of the luffing jib

We can provide a support function for erecting the luffing jib on larger LICCON 2 cranes. Activating the automatic erection system in the LICCON crane control system ensures that the adjustment winch is automatically adjusted by the control system as the telescopic boom is luffed.