LTM 1160-5.2 Mobile crane

The LTM 1160-5.2 has a long boom system with high load capacities. The 5-axle crane's superstructure is powered by the engine in the undercarriage using a mechanical shaft. In ECOmode, the LTM 1160-5.2 is particularly fuel-efficient. VarioBallast enables the crane to deliver high load capacities with a large ballast radius, making it perfect for use on constricted sites with a small ballast radius.
Max. load capacity 180 t
Telescopic boom 62 m
Max. hoist height 99 m
Max. radius 78 m
Number of axles 5

Technical data

Max. load capacity 180 t
at radius 2.50 m
Telescopic boom from 13.10 m
Telescopic boom up to 62.00 m
Lattice jib from 2.9 m
Lattice jib up to 40.0 m
Drive engine/make Liebherr
Drive engine 6-Zylinder-Diesel
Drive engine/power 400 kW
Number of axles 5
Drive/Steering standard 10 x 6 x 10
Drive/Steering option 10 x 8 x 10
Driving speed 85.00 km/h
Total ballast 54.00 t

Downloads

Technology

VarioBase®

VarioBase®

VarioBase makes the crane’s support system variable. It enables each outrigger to be extended to a different length. This enhances safety – particularly in constricted spaces. And what's more, the crane’s lifting capacities are significantly increased, particularly over the outriggers and depending on the configuration.

ECOmode

ECOmode

ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The LICCON 2 control system calculates the perfect engine speed for the diesel engine.

VarioBallast® (mechanical)

VarioBallast® (mechanical)

Mechanically slewing ballasting cylinders enable the ballast radius to be changed quickly to two different settings. The smaller radius is used in constricted conditions whilst the larger one is used if a higher lifting capacity is required. This significantly increases the crane’s flexibility.