LRT 1100-2.1 – The safe alternative!

  • Safety for the operator:

    The standard width crane cabin can be tilted backwards to provide a better viewing angle of the load.

  • Safe, variable support:

    VarioBase® support technology delivers higher lifting capacities and also ensures maximum operational safety.

  • Fully monitored:

    The crane monitors the outriggers, the ballast installation and the installation of the optional double folding jib with angle adjustment.

  • Strong or Long:

    Simple telescoping with telematics and two fixed telescoping paths.

  • Worldwide safety standard:

    Global uniform safety standard which complies with all current regulations – ANSI B30.5, EN 13000, Australian Standards (AS) and GOST standard.

LRT 1100-2.1

During the design of the LRT 1100-2.1 rough-terrain crane, our engineers focused on one specific criterion – safety. For both the crane operator and surrounding area. For example, the rough-terrain crane has outrigger monitors as standard. The support status is detected automatically and saved to the crane controller. The standard VarioBase® variable support base also enhances safety. It enhances flexibility on site and also increases the crane’s lifting capacity. The LRT 1100-2.1 has a telescopic boom with Liebherr’s time-tested telematic telescoping system for rough-terrain cranes, on which the various telescoping sections can be extended independently with a single cylinder and then pinned to the telescopic section above. This system is particularly simple and user-friendly, as excellent lifting capacities over the entire radius range can be achieved with just two telescoping modes, power or length.

Max. load capacity 100 t
Telescopic boom 50 m
Max. hoist height 69 m
Max. radius 54 m
Number of axles 2

Technical data

Max. load capacity 100 t
at radius 2.50 m
Telescopic boom from 12.60 m
Telescopic boom up to 50.00 m
Lattice jib from 2.0 m
Lattice jib up to 19.0 m
Drive engine/make Cummins
Drive engine 6-Zylinder-Diesel
Drive engine/power 194 kW
Number of axles 2
Drive/Steering standard 4 x 4 x 4
Driving speed 25.00 km/h
Total ballast 14.00 t

Downloads

Driving conditions

Jobsite driving

Technology

VarioBase®

VarioBase makes the crane’s support system variable. It enables each outrigger to be extended to a different length. This enhances safety – particularly in constricted spaces. And what's more, the crane’s lifting capacities are significantly increased, particularly over the outriggers and depending on the configuration.

ECOmode

ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The LICCON 2 control system calculates the perfect engine speed for the diesel engine.

Videos

Rough Terrain Crane

Rough Terrain Crane

Call up video

Rough Terrain Crane

Rough Terrain Crane

Call up video

The safe alternative:

Liebherr now also builds rough-terrain cranes. The LRT 1090-2.1 with a lifting capacity of 90 tonnes and the LRT 1100-2.1 with a lifting capacity of 100 tonnes deliver maximum safety, off-road capability, performance and flexibility.

Find out more

MyLiebherr - your Liebherr service world:

Our customer portal MyLiebherr is your entrance to the Liebherr service world. It gives you access to extensive basic and additional services for your mobile and crawler cranes, such as crane documentation, Crane Planner 2.0, the job planner and spare parts catalogue.

Find out more