Please choose your range

“As I see it, the crane’s rope is its heart”

A team led by Dr. Ilaka Mupende has developed a new type of high-strength fiber rope

Bound to attrack much attention

Together with the wire rope manufacturer Teufelberger, Liebherr is developing a new type of high-strength fiber rope which will replace wire ropes for various applications.

Truly an extreme location

The new climatic chamber in Biberach an der Riss (Southern Germany): temperatures can be as high as 176°F (80°C) here, or as low as 41°F (5°C) below freezing point. Sand or dust may swirl through the air to simulate conditions on a construction site in the desert. A moment later, monsoon-style rainfall sets in.

Proving ground

This is where a team led by Dr. Ilaka Mupende, Research and Experimental Manager at Liebherr-Components Biberach GmbH, is testing a high-strength synthetic-fiber rope for use on cranes. “The rope is extremely light but nevertheless very strong. It has the same load capacity as a steel rope and spools up excellently. Although the prestress is low in the lower rope layers, the rope is scarcely subject to any wear when several layers are spooled onto the drum.”

Thorough testing

This innovative product is being tested under extreme weather conditions as well as different load patterns. Together with his team Dr. Mupende is subjecting each prototype of the new rope to thorough testing on various fixtures for at least three months.

A decisive element

For Ilaka Mupende, the rope is only one element in the overall lifting gear, but a decisive one. “A high tower and a long jib may make the crane look highly spectacular, but without the rope the entire structure would be pointless. As I see it, the crane’s rope is just as essential as a human’s heart.”

As much as 80 percent lighter than a conventional steel rope

“The rope’s weight can therefore be almost entirely disregarded as an operating factor,” says the 52-year-old. There is an enormous gain in rope operating life as well. “The fiber rope we have developed has an operating life ten times longer than a steel rope.” Translated into customer benefits, this means the rope must not be replaced so frequently.

Correct spooling formation

During development work on the synthetic fiber rope, close attention was given to the correct spooling formation on the rope drum and to identifying the need for renewal when approaching the crucial rope wear limit. “A visual check on the outer sleeve of the fiber rope is all that’s needed,” says Dr. Mupende.

Until the rope is ready for the market

Ilaka Mupende remains fascinated by rope technology, and will press ahead with intensive research work until the high-strength fiber rope is ready for the market. An important aspect of his team’s work is identification of the wear limit. “Our aim in the next few years is to modify and optimize the rope to make it suitable for a variety of practical applications.”

  • 0
    Wish list
    The product was added to your wish list.
  • 0 Compare list
    Select at least one other product to start the comparison. You can only compare a maximum of 7 products per list. Remove products from the list or reset the list. You can only manage a maximum of 7 different compare lists at the same time. The product was successfully added.
    Start comparison
    Your compare list is empty. You can select products to compare on the product pages.
Your wish list includes:
Recently added: Your wish list does not contain any products.