LRH 200 unplugged Piling and drilling rig (LRH series)

The LRH 200 unplugged is one of the world’s first battery-powered piling and drilling rigs. During operation the deep foundation machine can be connected to a conventional electric supply or powered by battery without a cable, therefore “unplugged”. There are no restrictions in performance and application of the machine when compared to the conventional version with diesel engine.
Max. pile length 24.5 m
Max. pile weight 16 t
Leader inclination 1:3
Vertical travel device 6,5 m
Basic hammer weight max. 18,000 kg

Zero Emission

Zero Emission

The machine causes no local emissions and significantly less noise. Thus, it is also suitable for operation in areas sensitive to noise.

Electric engine

Electric engine

The innovative Liebherr machine has an electric engine.

Unplugged (battery powered)

Unplugged (battery powered)

The machine can be operated by battery without a cable, therefore: unplugged.

Plugged in (socket operation)

Plugged in (socket operation)

The machine can operate fully when connected to a conventional electric supply, or be recharged within a few hours.

Special radii and inclination

Special radii and inclination

The flexible leader kinematics allows very large radii of up to 8 m and inclinations of up to 18° in all directions. Thus, a complete pile group can be installed from one location without repositioning the carrier machine.

13-metre vertical travel device

13-metre vertical travel device

The special leader kinematics allow the leader to be raised or lowered by 6.5 m above/below ground level.

Easy transportation and quick set-up

Easy transportation and quick set-up

Basic machine and leader can be transported in one piece with all hydraulic hoses connected. The minimized assembly work allows for quick and easy transportation of the machine between jobsites.

Safe access

Safe access

Side platform, railings and ladders are fully integrated in the new machine design and no longer need to be removed for transport.

more
High operator comfort

High operator comfort

The innovative cabin design includes a modern air-conditioning system and an optimized view from the cabin, as well as an orthopaedic operator’s seat. All switches, joysticks and pedals are ergonomically positioned.

Attachment recognition

Attachment recognition

The automatic attachment recognition also records performance figures of the respective attachment.

more
Winch automation

Winch automation

Free-wheeling winches with slack rope monitoring and prevention.

more
Cruise Control

Cruise Control

Cruise Control is available for automatic piling and drilling processes and allows for values such as pull-down speed and rotational speed to be programmed in advance.

more
Leader inclination memory

Leader inclination memory

At the touch of a button, the leader can be set to the desired inclination at the piling or drilling point for each new working step.

more
High service availability

High service availability

A global service network with experienced technicians and fast access to spare parts ensure high machine availability and a long product service life.

more
Operating weight 81.5 t
Max. winch line pull 200 kN
Max. crowd force 200 kN
Drive Electric (zero emission)
Max. drive power 255 kW
Leader inclination 1:3
Max. height 29.2 m
Max. leader lenght 25.7 m
Vertical travel device 6,5 m
Max. pile length 24.5 m
Max. pile weight 16 t
Max. torque 250 kNm
Jib length 7.8 m
Basic hammer weight min. 6,740 kg
Basic hammer weight max. 18,000 kg
Ram mass min. 3,000 kg
Ram mass max. 10,000 kg
Predrilling, max. drilling depth 17.4 m
Predrilling, max. torque 35 kNm
Continuous flight auger drilling, max. drilling depth 34.5 m
Continuous flight auger drilling, max. drilling diameter 1,000 mm
Full displacement drilling, max. drilling diameter 500 mm
Full displacement drilling, max. drilling depth 35.2 m
Soil mixing, max. mixing diameter 1,500 mm
Soil mixing, max. effective length 34.3 m
Down-the-hole drilling, max. drilling depth 25.2 m
Min. transport width 3,490 mm
Min. transport height 3,400 mm
MyJobsite

MyJobsite

One single tool for the collection, documentation and analysis of all process, machine, construction site and position data. more

Recording of working processes (PDE)

Recording of working processes (PDE)

With the PDE process data recording system machine data is recorded during the working process. more

LIPOS positioning system

LIPOS positioning system

Accurate positioning and precise execution of piling or drilling processes. more

Ground Pressure Visualization

Ground Pressure Visualization

The Ground Pressure Visualization calculates the current ground pressure of the machine in real time and compares it with the specified safety limits of the relevant jobsite. more

Remote control

Remote control

The remote control simplifies the loading process for transportation as well as the assembly of the machine. more

Eco silent mode

Eco silent mode

With the eco silent mode the engine speed can be reduced to a predefined, required level. With this feature a notable reduction in diesel consumption can be achieved without any impact on operational output. Noise emissions are thus also lowered.

Automatic engine stop

Automatic engine stop

The machine can optionally be equipped with an automatic engine stop control. Thanks to this feature it automatically switches off during longer work breaks after evaluating several machine parameters. This is fuel saving and environmentally friendly.

Fleet management and teleservice

Fleet management and teleservice

The data transmission and positioning system “LiDAT” provides important information on the operation of the machine. With these data the operation becomes more efficient. Various additional modules allow machine data reporting or access through service engineers via teleservice.

more
Continuous flight auger drilling

Continuous flight auger drilling

The loosened soil material is continuously conveyed to the surface using a continuous auger, the so-called continuous flight auger. more

Impact driving

Impact driving

Impact driving uses a hydraulic hammer for the installation of various types of pile. The hammer’s ram mass impacts on the pile. more

Full displacement drilling

Full displacement drilling

Full displacement drilling is a modification of continuous flight auger drilling. The drilling tool used is a smooth pipe with an auger-type starter piece. more

Wet soil mixing

Wet soil mixing

For wet mixing a self-hardening suspension is introduced into the ground. more

Down-the-hole drilling

Down-the-hole drilling

For down-the-hole drilling a hammer is mounted on the lower end of a drill rod. The hammer is activated by adding compressed air. more

SOB Endlosschnecken

SOB Endlosschnecken

more

SOB Schneckenanfänger

SOB Schneckenanfänger

more

SOB Zubehör

SOB Zubehör

more

VdW Zubehör

VdW Zubehör

more

LRH 200 - When pile driving is not enough.

LRH 200 - When pile driving is not enough.

Call up video

Unplugged Product Launch 2022

Unplugged Product Launch 2022

Call up video

Battery powered piling rigs LRH 100.1 and LRH 200 unplugged - Interview Product Management

Battery powered piling rigs LRH 100.1 and LRH 200 unplugged - Interview Product Management

Call up video

MyJobsite – Your work at a glance

MyJobsite – Your work at a glance

Call up video

	Drilling assistant

Drilling assistant

Call up video

Sales and Service

Our customers can rely on a worldwide sales and service network. Search here for the right contact partner. Find your contact person

Used machines

Do you prefer a used machine? Find construction machines persuasive by experience. Used machines

Concrete pumps

Stationary concrete pumps in conjunction with concrete distribution systems are particularly economic for use over several days. Stationary concrete pumps

Attachments

With the attachment devices developed and manufactured in-house, we consolidate our position as a full-service provider in the deep foundation industry. Attachments for piling and drilling rigs

Foundation methods

Deep foundation machines from Liebherr can be applied for all common drilling methods, for slurry wall installation and soil improvement. Methods and applications

Customer service

Our Customer Service aims to effectively help in maintaining Liebherr equipment at its best. Customer service for crawler cranes

Application technology

Our application specialists assist with the correct choice of application and the most suitable machine configuration. Application technology

Digital solutions

We offer a number of IT solutions, which provide substantial support for all those involved in the construction site. Digital solutions