LTC 1050-3.1 - Compact for big jobs.

  • Extremely slimline:

    Its width of just 8' 4'' / 2.55 m enables the crane to manoeuvre through the smallest gaps.

  • Full visibility:

    The telescoping elevating cab delivers excellent visibility of the load and surrounding area.

  • Everything on board:

    Carry all the ballast, double folding jib and hook block with an axle load of 26,400 lb / 12 t.

  • Perfectly variable:

    Prepared for every site, however constricted, with VarioBase® support technology.

  • Free to choose:

    Strong and long or familiar and fast - available with TELEMATIK or rope pull technology.

  • Really safe:

    RemoteDrive enables the crane to be driven from outside – with perfect visibility of every constriction.

LTC 1050-3.1

The LTC 1050-3.1 delivers the outstanding handling of a classic all-terrain crane. Its compact design also makes an ideal hoisting tool for constricted sites. It shows all its strengths completing crane work in industrial buildings, old towns or in castles and palaces. Its VarioBase® support system with outriggers extended to different lengths mean that constricted conditions are not a problem for this compact crane. It carries all its own equipment and ballast, thus significantly reducing the time required for jobs. The elevating cab delivers maximum safety by providing improved all-round visibility from the cab. The crane can also be manoeuvred with all controls from outside using RemoteDrive – ensuring the operator has a perfect view of the constriction.

Max. load capacity 50 t
Max. hoist height 48 m
Max. radius 39 m
Number of axles 3
Max. load capacity 50 t
at radius 3.00 m
Telescopic boom from 8.10 m
Telescopic boom up to 36.00 m
Lattice jib from 1.50 m
Lattice jib up to 13.00 m
Drive engine/make Cummins
Drive engine 6-Zylinder-Diesel
Drive engine/power 243 kW
Number of axles 3
Drive/Steering standard 6 x 6 x 6
Driving speed 85.00 km/h
Total ballast 6.50 t

Boom/jib combinations: TELEMATIK

Boom/jib combinations: Rope pull technology

Rope pull technology: On-road driving


ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The crane control system calculates the perfect engine speed for the diesel engine.


ECOdrive makes the mobile crane significantly more comfortable and quieter by reducing the engine speed. Faster gearshifting delivers greater dynamic and traction offroad. On the road, the torque from the Liebherr diesel engine is used efficiently to minimise fuel consumption.


The RemoteDrive remote control enables the crane to be controlled from outside the driver’s cabin. This is not only possible during crane operations, but also whilst driving on the site. This delivers greater safety and comfort as the crane operator has a better view of problem areas as he can be right next to them. In other words, the operator can move himself to the areas with difficult access.


VarioBase makes the crane’s support system variable. It enables each outrigger to be extended to a different length. This enhances safety – particularly in constricted spaces. And what's more, the crane’s lifting capacities are significantly increased, particularly over the outriggers and depending on the configuration.

Lift cabin

The crane cabin on this crane can be telescoped into the air with infinite adjustment. The better view from above of the load and working environment significantly increases safety during crane operations – and driver comfort is also massively enhanced.

HVO ready

Up to 90 % lower CO2 emissions in action.

Installation work of a LTC Mobile Crane in Carcassonne

Installation work of a LTC Mobile Crane in Carcassonne

Call up video

LTC 1050-3.1 - RemoteDrive

LTC 1050-3.1 - RemoteDrive

Call up video

Whatever you want

Whatever you want

Call up video

When centimetres count:

The concept of manoeuvring using the remote control has now proven itself at an actual LTC job in very constricted conditions in a production building of a specialist aluminium die-casting company. Find out more

LTC 1050-3.1 lowered to get through Ehrenbreitstein Fortress:

An LTC 1050-3.1 had to complete multiple hoists at Ehrenbreitstein Fortress near Koblenz to erect works of art weighing several tonnes. The compact crane had to pass through two narrow points en route through the massive defensive walls. Find out more