Hub-type shaper cutters DIN 5480

High-quality shaper cutters from Liebherr are available within a very short time. Their impressive quality makes longer tool life possible. The standard tools are manufactured from ASP2052 / S390 material with an Alcrona Pro coating. The range of stock tools also offers customers great flexibility. Below you will find the available models in the category hub-type shaper cutters DIN 5480. The stock tools are available within a short space of time, and include a measurement report.
Module 1.50 - 10.00 mm
Number of teeth 10 - 58
Pressure angle 30 °
Bore d3 19.00 - 44.45 mm

Technical data

Variants

Table is scrollable
Module (mm) Number of teeth d0 (mm) Bore d3 (mm) d1 (mm) b1 (mm) Z2min Stock number Inquiries
1.50 30 45.00 19.00 40.00 36.00 42 W 615 081 02
1.75 30 52.00 19.00 45.00 41.00 42 W 617 581 02
1.75 58 101.00 44.45 90.00 46.00 78 W 617 571 02
2.00 26 52.00 19.00 45.00 41.00 36 W 620 081 02
2.00 38 76.00 31.75 70.00 41.00 53 W 620 061 02
2.00 50 100.00 44.45 90.00 46.00 70 W 620 071 02
2.50 30 75.00 31.75 68.00 41.00 42 W 625 061 02
2.50 40 100.00 44.45 90.00 46.00 56 W 625 071 02
3.00 18 54.00 19.00 45.00 43.00 25 W 630 081 02
3.00 26 78.00 31.75 70.00 43.00 36 W 630 061 02
3.00 34 102.00 44.45 92.00 46.00 48 W 630 071 02
4.00 14 56.00 19.00 46.00 46.00 20 W 640 081 02
4.00 20 80.00 31.75 70.00 46.00 28 W 640 061 02
4.00 26 104.00 44.45 90.00 46.00 36 W 640 071 02
5.00 12 60.00 19.00 48.00 46.00 18 W 650 081 02
5.00 16 80.00 31.75 68.00 46.00 22 W 650 061 02
5.00 20 100.00 44.45 88.00 46.00 28 W 650 071 02
6.00 12 72.00 31.75 60.00 46.00 18 W 660 061 02
6.00 18 108.00 44.45 95.00 46.00 25 W 660 071 02
8.00 10 80.00 31.75 65.00 46.00 16 W 680 061 02
8.00 14 112.00 44.45 95.00 46.00 20 W 680 071 02
10.00 10 100.00 44.45 82.00 46.00 16 W 600 061 02
To the inquiry list