Smart hydraulic actuator
Electrohydraulic actuators work like compact, highly capable “power houses” on the rail vehicles and are tailor made solutions for several application areas. The current application areas in rail vehicle construction reach from yaw damping, active lateral positioning, car positioning systems and active radius steering to tilting technology.
Electrohydraulic actuators fulfil demands of the future development of rail infrastructure – especially in reducing environmental burden, minimizing wear and noise while improving the performance of the rail vehicle.
Increased riding comfort
Electrohydraulic actuators are designed to position loads of several tons at train speeds up to 350 km/h into the pre-set position predetermined by an intelligent control unit or counter vibrations on the vehicle.
Electrohydraulic actuators play an important role in fulfilling the requirements for high train speeds and provide increased riding comfort.
An additional and essential advantage of this technology lies in the massive reduction of vehicle and infrastructure wear. Initially higher investment costs are offset by considerably reduced overhaul expenses, reduced energy expenses und increased transport capacity within short time.
Easy and low-cost installation
Electrohydraulic actuators are closed hydraulic systems.
Liebherr carries through the assembly, filling and final inspection at very high purity conditions, thus ensuring a trouble-free and long-living operation under the harsh conditions of rail traffic. The car builder therefore only needs to mount the electrohydraulic actuators into the rail vehicle and connect the power supply and the control unit. Thus, costly and time-intensive installation works that are necessary for classic hydraulic systems with hydraulic pipe laying and filling and bleeding the systems can be reduced.
Therefore, the risk to pollute the hydraulic channel by improper installation and to possibly damage the actuator is eliminated.
Electrohydraulic actuators - a “plug and play” solution
Electrohydraulic actuators are essentially maintenance-free. In the very unlikely event of a failure, the complete unit can be replaced without any hydraulic knowledge in a short time. Due to this simple way of installation, long downtimes can be excluded.
These innovative systems are controlled by a microprocessor controller also developed by Liebherr specifically for rail applications. The software can be programed, depending on requirements, to Security Level SIL2 acc. EN 50128. Liebherr’s electrohydraulic actuators can be adjusted for almost all customer requirements and support a quick, comfortable and above all safe arrival at the destination.
On the move – without barriers
Contacts
Liebherr-Transportation Systems GmbH & Co KG
Liebherrstrasse 1
2100 Korneuburg
Austria
- Phone+43 5 08 09 51-0
- Fax+43 5 08 09 51-500
Leveling actuator
The level control system adjusts the vehicle’s floor during the arrival at the station to height-level of the platform. This enables a barrier-free entrance.
There is a possibility to integrate a hydraulic wheel rim wear out compensation.
Typically a system consists of the following components: hydraulic power unit, levelling actuator, position sensor (optionally integrated into a vertical damper) and controller.
On the move – without barriers
Contacts
Liebherr-Transportation Systems GmbH & Co KG
Liebherrstrasse 1
2100 Korneuburg
Austria
- Phone+43 5 08 09 51-0
- Fax+43 5 08 09 51-500
Anti-buckling system
The damper optimises the operational behavior of the vehicle and also reduces the forces within the vehicle structure.
In order to provide improved and simplified maintenance and diagnostics facilities the damper can be equipped with an optional monitoring system.
For the application in modern articulated buses (semi active damper) an electronically controlled damping system was developed. The damper offers a very high damping force continuously variable up to 240 kN in a very compact design package. An integrated sensor system monitors the pre-set damping values continuously. The system’s design ensures a minimum damping capability even in cases of electronic system failure. For cost optimized applications, a two-stage damping system is also available.
On the move – without barriers
Contacts
Liebherr-Transportation Systems GmbH & Co KG
Liebherrstrasse 1
2100 Korneuburg
Austria
- Phone+43 5 08 09 51-0
- Fax+43 5 08 09 51-500
