LTM 1150-5.3

Mobile crane

  • Lots on board

    The crane can carry 9 t of ballast with an axle load of 12 t.

  • Economical design

    Carrying a large part of its ballast means there is often no need for an additional transport vehicle.

  • Makes a great deal possible

    Many jobs can be completed quickly without any additional equipment thanks to its long boom and the ballast it carries.

  • Off-road assistance

    Hill Start Aid helps starting on a gradient – consigning rolling backwards to history.

  • Efficient

    ECOmode and ECOdrive reduce fuel consumption by up to 10%.

  • Hook block can be ballasted

    Weighted plates on both sides of the hook block enable the weight of the block to be adjusted perfectly to the situation.

LTM 1150-5.3 - The jewel in your fleet.

With a maximum lifting capacity of 150 tonnes (175 USt) and a long telescopic boom, the LTM 1150-5.3 is the perfect addition to Liebherr’s crane range below the LTM 1160-5.2. With an axle load of twelve tonnes (26,450 lb), the crane can carry nine tonnes (19,800 lb) of ballast on public roads. This ballast enables it to complete lots of jobs without requiring an additional vehicle to transport the ballast. Its powerful telescopic boom can be extended with lots of add-on jibs. These are compatible with many of our cranes with lifting capacities between 100 and 180 tonnes (220,500 lb and 396,830 lb). We have continued our single-engine strategy on this crane with a mechanical drive unit for the superstructure. The weight reduction created by the elimination of the superstructure engine is used to deliver a longer boom and more lifting capacity.

Max. load capacity 150 t
Telescopic boom 66 m
Max. hoist height 92 m
Max. radius 72 m
Number of axles 5

What's inside

  • Lots on board:

    The crane can carry 9 t / 19,800 lb of ballast with an axle load of 12 t / 26,450 lb.

  • Economical design:

    Carrying a large part of its ballast means there is often no need for an additional transport vehicle.

  • Makes a great deal possible:

    Many jobs can be completed quickly without any additional equipment thanks to its long boom and the ballast it carries.

  • Off-road assistance:

    Hill Start Aid helps starting on a gradient – consigning rolling backwards to history.

  • Efficient:

    ECOmode and ECOdrive reduce fuel consumption by up to 10%.

  • Hook block can be ballasted:

    Weighted plates on both sides of the hook block enable the weight of the block to be adjusted perfectly to the situation.

Photo gallery

Technical data
Max. load capacity 150 t
at radius 3.00 m
Telescopic boom from 12.30 m
Telescopic boom up to 66.00 m
Lattice jib from 2.90 m
Lattice jib up to 26.00 m
Drive engine/make Liebherr
Drive engine 6-Zylinder-Diesel
Drive engine/power 400 kW
Number of axles 5
Drive/Steering standard 10 x 6 x 10
Drive/Steering option 10 x 8 x 10
Driving speed 85.00 km/h
Total ballast 45.00 t
Ballast systems

Counterweight

Boom/jib combinations

Boom/jib combinations

Driving conditions

On-road driving [t]

Jobsite driving

Technology

ECOmode

ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The crane control system calculates the perfect engine speed for the diesel engine.

ECOdrive

ECOdrive makes the mobile crane significantly more comfortable and quieter by reducing the engine speed. Faster gearshifting delivers greater dynamic and traction offroad. On the road, the torque from the Liebherr diesel engine is used efficiently to minimise fuel consumption.

Single-engine concept

Take one engine out to increase lifting capacity. Or more accurately – the superstructure is powered by the undercarriage engine. Gear shafts are routed from the distributor gear in the substructure via two mitre gears to the pump distributor gear in the superstructure. That enables us to remove one engine – and we use this to increase the crane’s lifting capacity.

Hillstart-Aid

Hillstart-Aid makes starting on gradients easier. Move off safely and easily without rolling backwards.

VarioBase®

VarioBase makes the crane’s support system variable. It enables each outrigger to be extended to a different length. This enhances safety – particularly in constricted spaces. And what's more, the crane’s lifting capacities are significantly increased, particularly over the outriggers and depending on the configuration.

AutoBallast

The AutoBallast function completes the ballasting process automatically. All the steps are carried out after the button has been pressed just once.

Increased flexibility and safety by using lifting capacity tables with different maximum wind speeds.

Up to 90 % lower CO2 emissions in action.

Videos
LTM 1150-5.3 - The jewel in your fleet

LTM 1150-5.3 - The jewel in your fleet

Call up video

LTM 1150-5.3 - The new One in permanent use

LTM 1150-5.3 - The new One in permanent use

Call up video

MyLiebherr

Our customer portal MyLiebherr is your entrance to the Liebherr service world. It gives you access to extensive basic and additional services for your mobile and crawler cranes

Discover more