Shank-type shaper cutters

Module (mm)


Number of teeth


Taper


length I0 (mm)

Hits 1-3 of 3

Shank-type shaper cutters DIN 3972/II

Module 1.00 - 5.00 mm
Number of teeth 10 - 24
Pressure angle 20 °
Taper MK2 / MK2 / MK2 / MK2 / MK2 / MK2 / MK2 / MK2 / MK4 / MK2 / MK4 / MK4 / MK4
length I0 100.00 - 150.00 mm

Shank-type shaper cutters DIN 5480 Shank-type shaper cutters

Module 0.60 - 5.00 mm
Number of teeth 10 - 16
Pressure angle 30 °
Taper MK1 / MK2 / MK2 / MK2 / MK2 / MK2 / MK2 / MK4 / MK2 / MK4 / MK2 / MK4 / MK4 / MK4 / MK2 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4
length I0 70.00 - 200.00 mm

Shank-type shaper cutters DIN 5482

Module 1.60 - 2.25 mm
Number of teeth 5 - 20
Pressure angle 30 °
Taper MK2 / MK2 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4
length I0 95.00 - 200.00 mm
  • Results per page