With the LTM 1150-5.4E, Liebherr is setting new standards at Bauma 2025 in terms of sustainability and efficiency. On and off-road, a 400 kW (544 HP) combustion engine with exhaust emission stage 5 provides for powerful drive. The motor is fully compatible with hydrogenated vegetable oil (HVO) and, compared to diesel fuel, reduces operational CO2 emissions by up to 90 %.
In crane operation, the choice between combustion engine or electric motor allows flexible use. The latter reduces both air and noise emissions to a minimum and is ideal for "zero emissions areas", as well as noise-sensitive areas. With this combination of state-of-the-art technology and sustainability, the LTM 1150-5.4E is one of the trade fair's undisputed highlights.
Electric drive offers flexible use
The newly developed drive with electric motor impresses with a 111 kW electric motor, which guarantees unlimited crane operation, offering virtually the same performance as the 6-cylinder combustion engine. For the transfer of power to the consumers in the crane superstructure, the electric drive uses the existing gear shafts from the transfer gearbox in the chassis to the pump transfer gearbox in the superstructure.
The electric version complements the conventional model of the LTM 1150-5.4 with a water-cooled high-speed electric motor, a distributor gear, a battery and the necessary control technology. The electric motor's distributor gear is integrated cleverly between the chassis transfer gearbox and the gear shafts to the superstructure. This clever yet simple solution enables the operator to switch flexibly between diesel-hydraulic power and electro-hydraulic power.
Mobile crane with battery pack
The drive concept of the LTM 1150-5.4E builds on the proven technology of the Liebherr LTC 1050-3.1E compact crane, albeit with an important upgrade: an integrated battery pack. This concept brings two key advantages. Firstly, the crane can be operated autonomously for around four hours without a power connection thanks to its battery. Secondly, even a low connected load, around 16 or 32 Amps, is enough to unleash the crane's full power since the battery acts as an efficient buffer. The crane draws high current strengths for peaks in performance from the battery, which is constantly recharged via the site's power source. Charging takes place via the CEE high-current plug with 16, 32 or 64 Amps and up to 44 kW of power or via a modern CCS plug for fast charging at up to 80 kW.
The 99 kWh battery is securely installed in a box weighing around 1.5 tonnes at the rear of the crane. To enable driving on public roads, the ballast plates have been adapted accordingly - a carefully thought-out concept for maximum flexibility and efficiency on the construction site.
LTM 1150-5.4 - the jewel in your fleet
Under the slogan "The jewel in your fleet", Liebherr showcased the LTM 1150-5.3 in 2020 - a real all-rounder that shines in every fleet. With its 66-metre-long telescopic boom, the 150-tonne crane ranks in the league of the 200-tonne class and impresses with exceptional lifting capacities, both with the boom fully raised and at a large radius. With the telescopic boom extended to its maximum length, the workhorse can lift 9.1 tonnes. That makes it perfect for erecting tower cranes and radio masts.
On the construction site, the economical 5-axle mobile crane is immediately ready for use, since it already carries nine tonnes of ballast with it, with a total weight of 60 tonnes. This means it can carry out many jobs without requiring additional vehicles for the transport of ballast. All this saves time and money, and makes the crane even more valuable to crane contractors – hence the slogan: "The jewel in your fleet".
