Press releases | 2014/05/01
A new glass roof was recently installed at Erding thermal water world complex (Therme Erding). Two new Liebherr LTM 1750-9.1 mobile cranes were used for this job. The total area of the roof structure is 2,600 m² and it was ho-isted into position in two segments. The heaviest load totalled 203 tonnes including hooks and cross beams.
Two Liebherr 750-tonners operated by MSG Krandienst GmbH and Wiesbauer GmbH &Co. KG were erected in Er-ding at the request of crane service contractor AKM Auto-kranvermietung GmbH based in Munich. Equipped with Y guying and full ballast, the two heavy duty cranes got to work and hoisted the new glass roof into the correct position around 20 m in the air. The roof covers the new wave zone at Erding water world and can be half-opened. Immediately next to it is the new Therme Erding Hotel Victory which is also under construction.
The features of the LTM 1750-9.1 with its maximum load capacity of 750 tonnes includes its short setup times. The nine-axle model from Liebherr can carry its entire telescopic boom on public roads. A comprehensive range of equipment gives the new LTM 1750-9.1 an especially wide range of ap-plications: With the 52 m long telescopic boom, the Y-telescopic boom guying and a wide range of lattice jibs, the crane has a variety of boom systems and achieves hoisting heights up to 154 m and boom radii up to 112 m.
2026/09/17
Press releases
Expansion in the taxi crane segment: Henneberger acquires Liebherr LTM 1100-5.3
The crane and logistics company Henneberger Schwerlast e.K. has acquired a Liebherr mobile crane LTM 1100-5.3. The ability to carry up to 16.9 tonnes of counterweight on public roads and the vehicle’s narrow width of just 2.55 metres were the decisive factors in the purchase.
2026/09/16
Press releases
ESB invests in the future with a new LTM 1055-3.3 and the next generation at the helm
ESB Kranverleih Transport u. Hebetechnik GmbH is has taken another step in the modernise of its fleet with the acquisition of a new LTM 1055-3.3 featuring LICCON3 control. At the same time, the family-run company is also positioning itself for the future in terms of personnel: with Larissa Maurer, the third generation has been represented in the management since the start of the year.
2026/09/15
Press releases
At bauma CONEXPO INDIA 2026, taking place from 15 to 18 September, the Liebherr Group presents engineering excellence through a broad portfolio of machines and technologies. The products at outdoor booth E01 address construction, quarrying, recycling, infrastructure, and industrial applications for the Indian market. Visitors to the 792 m² outdoor booth can explore exhibits from five product segments.
