LPS 600

The LPS 600 Liebherr portal crane manages up to 2,000 tonnes in bulk cargo handling with a maximum outreach of 58 metres. The LPS 600 is also the ideal solution for handling containers and general cargoes, particularly on narrow quays. The portal solution allows trains and trucks to travel below the portal.

Lifting capacity (max.) - 208 t
208 t
Jib length - 58 m
58 m
Total weight - 540 t
540 t
Hoisting/lowering max. - 120 m/min
120 m/min

Sales

Service

Used Equipment Marketplace

Features

4-chord boom

The four struts (lattice design) of the boom provide maximum stability and handle the sideways pull better than alternative boom designs. This results in a longer service life.

Portal

The design of the portal is customised. This includes: rail spacing, portal height, wheel loads and ladder to the slewing platform.

Pull cylinder

The pull cylinder over the boom offers many advantages: no collision with swinging load, no buckling of the cylinder and full protection of the piston rod in park position.

Main supply

The main supply can be effected via low voltage (400 V) or high voltage (1 kV - 20 kV). The cable drum is secured to the portal and independently takes care of the unwinding and winding of the power cable.

Hydrostatic drive

Closed hydraulic loops are used for all main functions such as lifting, turning and luffing. The crane operator benefits from extremely precise control, the service personnel benefit from a minimum number of components and the operating company benefits from reduced fuel consumption.

Anti-collision protection

Buffers are provided at all 4 corners of the portal as collision protection. Visible limit switches can be installed as additional security.

Paintwork

To defy the rough maritime environmental conditions, the standard paintwork comprises a primer coat, an intermediate coat and a top coat.

Storm protection

The manual storm anchor is suitable for wind speeds up to 42 m/s.

Tower cab position

Optimal views for the operator. The forward-mounting position of the tower cab with 70% glass (safety glass) offers the driver a comprehensive visibility range.

Service network

Like all maritime cranes from Liebherr, our mobile harbour crane can rely on a dense service network worldwide. This ensures short downtimes and a quick response.

Driver's cab

Noise protection, windshield wiper, air conditioning. The ergonomic and comfortable features of the cab increase the concentration and reduce the fatigue of the crane operator – for consistently high productivity and a high level of safety.

Safety devices

The safety of people, the infrastructure and the environment takes top priority. Our mobile harbour crane has a number of precautionary measures for increased safety in your port.

Four-rope grab control

The synchronisation of the winches is monitored and optimised by the four-rope grab control.

Lighting

Operation without a loss of productivity is also possible when it is dark. High-performance LED headlights at the boom and tower provide optimal lighting.

Enclosed tower design

The enclosed design of the tower gives the crane operator secure and weather-protected access to the tower cab.

Round tower design

The round tower design minimises damage caused by torsion. Forces are evenly distributed to the steel structure and the slewing ring. As a result, the service life of the crane is increased significantly.

Horizontal load path

During luffing the load always moves along the horizontal load path.

Hoist mechanism

The lifting and lowering movements up to the maximum load capacity are effected steplessly, i.e. without changing gears. The lifting speed is up to 120 metres per minute.

Cooling

The speed of the special Howden coolers is automatically adapted to cooling requirements. As a result, diesel consumption and noise levels are reduced to a minimum and the service life is maximised.

Litronic crane control

The control system of the mobile harbour crane range, which was developed by Liebherr, focuses on precision, safety and productivity. Obtain a detailed overview here.

Machine housing concept

The single-storey slewing platform houses the drive unit, slewing mechanisms and hoist mechanisms, the control cabinet room and the alternator. All components are easily accessible for maintenance work.

Control cabinet room

All electric and electronic components used satisfy military standards. External environmental conditions have no impact on the functionality. The entire system was developed for the maritime environment with temperatures from -40°C to +80°C.

Slack rope protection

A slack rope protection device is mounted on the winch frame. The winding on the winch is effected evenly, and the hoist rope is always kept taut.

Stage V / Tier 5 final engine

The Liebherr mobile harbour crane is equipped with the latest generation of diesel engines for the exhaust emissions standards of EU stage V or EPA Tier 5 final.

Accessibility

Regular servicing maintains the efficiency of the crane. So maintenance work can be carried out quickly, the accessibility of the relevant components is to the fore. This reduces downtimes.

Glass fibre reinforced plastic

The machine housing panels are made from glass fibre reinforced plastic. The advantages include low weight and resistance to rust.

Technical data

Downloads

Optional equipment

Videos