Engineering TechnicianNewport News, VA

The Engineering Technician works with Engineers, Technicians, and field personnel in support of engineering tests and R&D projects on mining products.

Responsibilities

• Works with Engineers and other Technicians performing tests on mining products, equipment, or systems.
• Reads and interprets sketches, engineering drawings, electrical or hydraulic schematics, or verbal instructions to complete required tasks.
• Fabricates, assembles, troubleshoots, or reconfigures test fixtures.
• Works as a team member with Engineers, other Technicians, and field personnel on tests or R&D projects.
• Modifies, builds, or installs prototype truck components in the test lab or in the field.
• Installs data acquisition equipment required for engineering tests in the test lab or in the field.
• Builds, or repairs electrical control wires used for new or existing test equipment.
• Keeps work areas clean and orderly.
• Works with supervisor or co-workers to perform mechanical or electrical tasks.
• Receives and issues parts using the established warehouse procedures.
• Utilizes the LN and LIKV to check parts availability or search for Bill of Materials (BOMs) and engineering drawings.
• Performs pre-shift inspections on support equipment and haul trucks.
• Has knowledge of and uses the lock out tag out procedures required for task where potential energy is a hazard.
• Performs duties of basic haul truck operation in support of testing and site maintenance
• Participates in Engineering Development Program.

Competencies

Education and Experience:

• Engineering Technician 8: High school diploma or equivalent and 1 year automotive or heavy equipment experience; or technical school or apprenticeship certificate and/or training; or equivalent combination of education and experience.
• Engineer Technician 7: Must have a minimum of 1 year in Level 8 with at least meeting expectations, including all functions of Level 8 plus at least 6 mandatory requirements of Level 7
• Engineering Technician 6: Must have a minimum of 1 year in Level 7 with at least meeting expectations, including all functions of Level 7 plus at least 4 mandatory requirements of Level 6
• Engineering Technician 5: Must have a minimum of 2 years in Level 6 with at least meeting expectations, including all functions of Level 6 plus at least 3 mandatory requirements of Level 5
• Engineering Technician 4: Must have a minimum of 2 years in Level 5 with at least meeting expectations, including all functions of Level 5 plus at least 4 mandatory requirements of Level 4
• Engineering Technician 3: Must have a minimum of 2 years in Level 4 with at least meeting expectations, including all functions of Level 4 plus at least 3 mandatory requirements of Level 3
• Engineering Technician 2: Must have a minimum of 2 years in Level 3 with at least meeting expectations, including all functions of Level 3 plus at least 2 mandatory requirements of Level 2
• Engineering Technician 1: Must have a minimum of 2 years in Level 2 with at least meeting expectations, including all functions of Level 2 plus at least 2 mandatory requirements of Level 1

Engineering Technician 8

• Ability to use basic functions in MS Office (Word, Excel, and Outlook) or similar software packages.
• Ability to work according to established engineering, company, or customer safety procedures.
• Ability to operate and maintain power and hand tools.
• Ability to handle and dispose of hazardous wastes such as oil, antifreeze, parts cleaner solvent, or similar material.
• Ability to work as a team member with Engineers, other Technicians, and field personnel on tests or Product Validation projects.
• Ability to work with supervisor or co-workers to perform mechanical or electrical tasks.

Engineering Technician 7

• Preforms task of a level 8 technician.
• Ability to perform basic mechanical and electrical assembly
• Has knowledge of and uses the lock out tag out procedures required for task where potential energy is a hazard.
• Ability to convert from US to metric engineering units.
• Ability to perform basic automotive or heavy equipment maintenance or repair.
• Uses established procedures for parts processing.
• Maintains test equipment and uses the calibration procedures in place to ensure equipment is calibrated and in good condition.
• Skilled in the operation of at least one of the following (Bull dozer, motor grader, excavator).
• Skilled in the operation in the operation of forklifts, overhead cranes, man lift, and tele handler.
• Ensures rigging is inspected and selected for the correct task. Ensures the correct procedures are used for lifting task.
• Maintains annual MSHA Training and GMM Training

Engineering Technician 6

• Performs task of a Level 7 technician.
• Knowledge of basic hydraulic and electrical systems.
• Skilled in performing mechanical and electrical assembly tasks.
• Ability to receive and issue warehouse parts to projects.
• Ability to track, send and receive test equipment to various vendors for calibration.
• Knowledge of basic computer operation such as serial or network connections.
• Reads and interprets sketches, engineering drawings, electrical or hydraulic schematics, or verbal instructions to complete required tasks.
• Modifies, builds, or installs prototype truck components in the test lab or in the field.
• Performs pre-shift inspections on support equipment and haul trucks.
• Builds or repairs electrical control wires used for new or existing test equipment.
• Skilled in basic haul truck operation in support of testing and site maintenance.
• Skilled in the operation of all of the following (Bulldozer, motor grader, excavator).

Engineering Technician 5

• Performs task of a level 6 technician.
• Installs data acquisition equipment required for engineering tests in the test lab or in the field.
• Knowledge of basic welding and fabrication principles.
• Ability to use instruments for making measurements including tape measure, crane scale, digital micrometer, pressure gauges, temperature probes, tachometer.
• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute area, volume and weights.
• Ability to use data acquisition equipment and perform sensor setup.
• Assembles, troubleshoots, or reconfigures test fixtures.
• Independently performs preventative maintenance on haul trucks and support equipment.
• Knowledge of the autonomous setup and equipment that’s physically on the truck (lidars, radars, smart micro sensors, and SV cameras.)
• Verifies operation of sensors or data acquisition equipment required for engineering tests in the test lab or in the field.
• Ability to use TMS and utilize TeamViewer (autonomy).
• Skilled in safety operator for autonomous trucks.
• Skilled in advanced haul truck operation in support of testing and site maintenance.

Engineering Technician 4

• Performs task of a Level 5 technician.
• Skilled in automotive or heavy equipment maintenance or repair.
• Troubleshoots data acquisition equipment, cables, and sensors.
• Ability to plan and order PM supplies.
• Ability to calibrate sensors per engineers’ request.
• Ability to start RPK and operate FMS/TMS systems. (autonomy)
• Ability to use CAN tools to reset faults on STW. (autonomy)
• Works effectively with minimal help or guidance from supervisor or co-workers to perform mechanical or electrical tasks.
• Follow procedures to schedule trucks for maintenance or testing.
• Troubleshoots basic electrical circuits and hydraulic systems.
• Complete the steps to become a Certified Surface Foreman.

Engineering Technician 3

• Performs task of a Level 4 technician.
• Performs risk assessment to identify hazards before performing task.
• Skilled in reading schematics, installation, and troubleshooting basic electrical circuits.
• Ability to plan and schedule PM events.
• Works with engineers, technicians, or independently to perform tests on mining products, equipment, or systems in the field or in the test lab.
• Skilled in reading schematics, installation, and troubleshooting basic hydraulic circuits.
• Ability to trouble shoot autonomous systems ( STW , TMS, FMS , RPK, CIC)
• Performs basic haul truck Drive System inspection and troubleshooting

Engineering Technician 2

• Performs task of a Level 3 technician.
• Capable of checking own work and work of others.
• Provides input to engineers or supervisor on the type of equipment required to perform a specific task.
• Performs advanced haul truck Drive System inspection, troubleshooting, repair and commissioning.
• Ability to organize test equipment, tools, machines, and personnel resources to align with needs of engineering stakeholders.
• Trains or mentors technicians on procedures, proper use of data acquisition hardware and sensors, and general truck operation and safety.
• Utilizes truck software such as the Truck Diagnostic tool and Webvisu to perform engineering tests when required.

Engineering Technician 1

• Performs task of a Level 2 technician.
• Skilled in the use of data acquisition equipment and sensors to implement a test plan.
• Acts as the skilled Technician for the test lab/proving grounds in at least one specialized area of test and measurement data acquisition such as hydraulics, noise/vibration, or electrical controls.
• Follows and implements the test plan by working with customer, supplier, or other department personnel.
• Specifies, installs, and verifies operation of sensors or data acquisition equipment required for engineering tests based on the requirements in the test plan.
• Ability to break down complex problems and isolate variables to create a systematic plan for accomplishing project goals.
• Ability to organize, document and articulate technical information needed for collaborative problem solving and issue resolution.

Additional Responsibilities:

• Is expected to travel nationally and internationally up to 30% to customer or supplier sites.
• Ability to complete and maintain mine certifications or safety training such as Mine Safety and Health Administration (MSHA) hazard training.
• Ability to obtain and maintain a valid driver’s license and passport.

Our Offer

An interesting and ambitious role in a successful international company. We offer a secure work environment with a comprehensive benefits package that includes major medical, dental and vision insurance, 401K plan with company match, paid vacation and personal days and competitive salary.

Referral Bonus: Tier IV

Have we awoken your interest? Then we look forward to receiving your online application. If you have any questions, please contact Thomas Steele.

Liebherr-America, Inc. and its US affiliates are Equal Opportunity Employers. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
If you are a California resident, please visit Liebherr USA, Co. Privacy Statement for more information regarding how Liebherr-America, Inc. and its US affiliates collect and process your personal information.

One Passion. Many Opportunities.