Mining Dragline HS 8300

HS 8300 mining dragline

Performance

The mining dragline HS 8300 has been designed to meet the tough conditions in mining environments. The machine delivers power and performance with low cost per ton and high turnover rates. The interlock control system allows for power regeneration in dragline operation, reducing fuel consumption as well as wear and tear of the free-fall winch.

Weight

approx. 364 t
802,483 lbs

Drive

Liebherr V12
(induction engine available)

Power

1250 kW
1675 hp
with hybrid drive

Boom

up to 50 m
164 ft

Bucket

up to 11.5 m³
15 yd³

Pressure

1.56 kg/cm²
153.0 kPa

Design

according to
EN 474-1
and
EN 474-12

Maximum service life

During dragline operations, the HS 8300 must endure high dynamic stresses. Therefore, the steel construction is strengthened considerably.

This not only increases the performance but also doubles the service life in comparison to the standard series.

360° view

Overburden removal in surface mining

The HS 8300 is deployed for top soil removal overlying the mineral deposits and subsequently refilling of the mined and empty strip.

The dragline excavator

Variable boom configurations

Modular boom sections allow for a certain degree of flexibility in terms of strip width and digging depth when choosing the ideal extraction method.

Customer-specific tools (e.g. buckets or teeth) and software also help to adapt to the mining environment.

Digging ranges

Digging and dumping ranges at 40° boom angle

at an assumed density of 1.6 t/m³ and a fill factor of 100 %

All digging and dumping ranges in detail

Boom length	35	44	50	m
GP - General purpose bucket	11.5	7.6	4.6	m³
HD - Heavy duty bucket	11.1	7.3	4.2	m³
XHD - Extra heavy duty bucket	10.7	6.9	3.8	m³
Load capacity	30.0	19.2	11.2	t
Digging/dumping reach*	29.8	36.7	41.3	m
Digging depth	14.9	18.4	20.6	m
Dumping height	16.1	24.0	28.6	m
_{*the reach is calculated from the rotation centre of the machine.}

When agility and low ground pressure are essential

The rapid set-up and the easy repositioning of the 380-tonne machine guarantee a quick start of operations.

Crawler tracks with low ground pressure allow the machine to operate in challenging terrain.

Product specifications

Limestone extraction

Extra boost

The machine can be fitted with Liebherr’s Pactronic^® hybrid drive, which offers both economical and ecological advantages.

Surplus energy is stored and regenerated to increase material handling capacity while significantly reducing fuel consumption.

Sand quarrying

Topsoil removal

Topsoil excavation in a German coal mine. Overburden overlying the raw material deposit is removed to get to the valuable minerals.

01/04

Get in touch

If you have any further questions, please contact our local sales or service team.

Our competences

Customer service

The continuous improvement and expansion of the service network is part of Liebherr’s commitment to offer the best possible support to customers worldwide.

Dragline operation

Thanks to their robust steel construction, the HS series of machines is ideally suited to the demands of mining work.

HS 8300 mining dragline

Performance

Maximum service life

Overburden removal in surface mining

The dragline excavator

Variable boom configurations

Digging ranges

Digging and dumping ranges at 40° boom angle

Digging and dumping ranges at 45° boom angle

When agility and low ground pressure are essential

Limestone extraction

Extra boost

Sand quarrying

Topsoil removal

Limestone excavation

Sand quarrying

Gravel extraction / Earthmoving

Get in touch

Our competences

Customer service

Dragline operation

Boom length	35	44	50	m
GP - General purpose bucket	13.0	9.2	6.1	m³
HD - Heavy duty bucket	12.6	8.8	5.7	m³
XHD - Extra heavy duty bucket	12.2	8.4	5.4	m³
Load capacity	34.7	26.9	20.2	t
Digging/dumping reach*	27.7	34.1	38.3	m
Digging depth	13.9	17.1	19.2	m
Dumping height	18.4	25.7	31.5	m
_{*the reach is calculated from the rotation centre of the machine.}