LTM 1300-6.3
Mobile crane
LTM 1300-6.3 - Reaching new heights
The LTM 1300-6.3 sets a new world record – a mobile crane which can carry a complete 90 metre (295 ft) telescopic boom on public roads with an axle load of 12 tonnes (26,450 lb). A versatile, economical fast-erecting crane with a peerless telescopic boom length in its class. It features all our latest innovations to ensure safe, powerful crane operations – ECOmode, ECOdrive, VarioBase®Plus, VarioBallast®, Auto-Ballast, single-engine concept and windspeed load charts. The 300 tonne (360 USt) model will add to the portfolio of Liebherr 6-axle cranes.
Max. load capacity - 300 t
300 t
Telescopic boom - 90 m
90 m
Max. hoist height - 120 m
120 m
Max. radius - 94 m
94 m
Number of axles - 6
6
Photo gallery
Technical data
| Max. load capacity | 300 t |
| at radius | 3.00 m |
| Telescopic boom from | 14.70 m |
| Telescopic boom up to | 90.00 m |
| Lattice jib from | 4.00 m |
| Lattice jib up to | 43.00 m |
| Drive engine/make | Liebherr |
| Drive engine | 8-Zylinder-Diesel |
| Drive engine/power | 455 kW |
| Number of axles | 6 |
| Drive/Steering standard | 12 x 6 x 12 |
| Drive/Steering option | 12 x 8 x 12 |
| Driving speed | 85.00 km/h |
| Total ballast | 88.00 t |
Downloads
Videos
Reaching new heights
First job for the first
Boom/jib combinations
Driving conditions
Ballast systems
Technology
ECOmode
ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. This is done by automatically disengaging the pump drive.
ECOdrive
ECOdrive makes the mobile crane significantly more comfortable and quieter by reducing the engine speed. Faster gearshifting delivers greater dynamic and traction offroad. On the road, the torque from the Liebherr diesel engine is used efficiently to minimise fuel consumption.
Single-engine concept
Take one engine out to increase lifting capacity. Or more accurately – the superstructure is powered by the undercarriage engine. Gear shafts are routed from the distributor gear in the substructure via two mitre gears to the pump distributor gear in the superstructure. That enables us to remove one engine – and we use this to increase the crane’s lifting capacity.
VarioBase® Plus
The combination of VarioBase technology and the crane’s structural steelwork. A trapezoidal support combined with the various support base delivers even higher lifting capacities, particularly over the crane’s rear outriggers.
VarioBallast® (mechanical)
Mechanically slewing ballasting cylinders enable the ballast radius to be changed quickly to two different settings. The smaller radius is used in constricted conditions whilst the larger one is used if a higher lifting capacity is required. This significantly increases the crane’s flexibility.
AutoBallast
The AutoBallast function completes the ballasting process automatically. All the steps are carried out after the button has been pressed just once.
