Mobile crane LTM 1150-5.3

LTM 1150-5.3

Mobile crane

LTM 1150-5.3 - The jewel in your fleet.

With a maximum lifting capacity of 150 tonnes (175 USt) and a long telescopic boom, the LTM 1150-5.3 is the perfect addition to Liebherr’s crane range below the LTM 1160-5.2. With an axle load of twelve tonnes (26,450 lb), the crane can carry nine tonnes (19,800 lb) of ballast on public roads. This ballast enables it to complete lots of jobs without requiring an additional vehicle to transport the ballast. Its powerful telescopic boom can be extended with lots of add-on jibs. These are compatible with many of our cranes with lifting capacities between 100 and 180 tonnes (220,500 lb and 396,830 lb). We have continued our single-engine strategy on this crane with a mechanical drive unit for the superstructure. The weight reduction created by the elimination of the superstructure engine is used to deliver a longer boom and more lifting capacity.

HVO fuel

Compare

Max. load capacity - 150 t
150 t
Telescopic boom - 66 m
66 m
Max. hoist height - 92 m
92 m
Max. radius - 72 m
72 m
Number of axles - 5
5

HVO fuel

Compare

What's inside

Lots on board:

The crane can carry 9 t / 19,800 lb of ballast with an axle load of 12 t / 26,450 lb.

Economical design:

Carrying a large part of its ballast means there is often no need for an additional transport vehicle.

Makes a great deal possible:

Many jobs can be completed quickly without any additional equipment thanks to its long boom and the ballast it carries.

Off-road assistance:

Hill Start Aid helps starting on a gradient – consigning rolling backwards to history.

Efficient:

ECOmode and ECOdrive reduce fuel consumption by up to 10%.

Hook block can be ballasted:

Weighted plates on both sides of the hook block enable the weight of the block to be adjusted perfectly to the situation.

Photo gallery

Technical data

Max. load capacity	150 t
at radius	3.00 m
Telescopic boom from	12.30 m
Telescopic boom up to	66.00 m
Lattice jib from	2.90 m
Lattice jib up to	26.00 m
Drive engine/make	Liebherr
Drive engine	6-Zylinder-Diesel
Drive engine/power	400 kW
Number of axles	5
Drive/Steering standard	10 x 6 x 10
Drive/Steering option	10 x 8 x 10
Driving speed	85.00 km/h
Total ballast	45.00 t

Downloads

Technical Data - Mobile crane LTM 1150-5.3 [m/t]

PDF (3.5 MB)

Videos

LTM 1150-5.3 - The jewel in your fleet
LTM 1150-5.3 - The new One in permanent use

Boom/jib combinations

Driving conditions

On-road driving

Jobsite driving

Ballast systems

Counterweight

Technology

ECOmode

ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The crane control system calculates the perfect engine speed for the diesel engine.

ECOdrive

ECOdrive makes the mobile crane significantly more comfortable and quieter by reducing the engine speed. Faster gearshifting delivers greater dynamic and traction offroad. On the road, the torque from the Liebherr diesel engine is used efficiently to minimise fuel consumption.

Single-engine concept

Take one engine out to increase lifting capacity. Or more accurately – the superstructure is powered by the undercarriage engine. Gear shafts are routed from the distributor gear in the substructure via two mitre gears to the pump distributor gear in the superstructure. That enables us to remove one engine – and we use this to increase the crane’s lifting capacity.

Hillstart-Aid

Hillstart-Aid makes starting on gradients easier. Move off safely and easily without rolling backwards.

VarioBase®

VarioBase makes the crane’s support system variable. It enables each outrigger to be extended to a different length. This enhances safety – particularly in constricted spaces. And what's more, the crane’s lifting capacities are significantly increased, particularly over the outriggers and depending on the configuration.

AutoBallast

The AutoBallast function completes the ballasting process automatically. All the steps are carried out after the button has been pressed just once.

MyLiebherr

Our customer portal MyLiebherr is your entrance to the Liebherr service world. It gives you access to extensive basic and additional services for your mobile and crawler cranes

MyLiebherr

Discover more

The curtain has fallen

At the start of 2020, the Sales, Marketing and Product Management Departments in Ehingen were planning to unveil the new LTM 1150-5.3 mobile crane during the second half of the year at the autumn trade shows. But it all came to nothing. Like so much else in 2020, the unveiling of the new 150 tonne crane simply did not go to plan.

Customer magazine

The magazine for customers and friends of mobile and crawler cranes. Here you will find some extraordinary crane impressions and stories!

Used cranes

Liebherr is also specialized in used mobile and crawler cranes. We ensure the safety and durability of the cranes by our global service network.

LTM 1150-5.3

Mobile crane

LTM 1150-5.3 - The jewel in your fleet.

What's inside

Photo gallery

Technical data

Downloads

Videos

LTM 1150-5.3 - The jewel in your fleet

LTM 1150-5.3 - The new One in permanent use

Boom/jib combinations

Boom/jib combinations

Driving conditions

On-road driving

Jobsite driving

Ballast systems

Counterweight

Technology

ECOmode

ECOdrive

Single-engine concept

Hillstart-Aid

VarioBase®

AutoBallast

WindSpeed load charts

HVO ready

MyLiebherr

Discover more

Customer magazine

Used cranes

LTM 1150-5.3