Product segments

Please enter your search text

Search text

EnglishEnglish
The product was added to your wish list.
The product was successfully added to the product comparison.
LiebherrRefrigeration and freezing
FridgesFreezersWine fridgesProfessionalSpare partsServiceExperience LiebherrOther product segmentsIreland (en)
Refrigeration and freezingProfessionalLaboratory and healthcareLaboratory freezersSCFfg 4002 Performance
product image 0

SCFfg 4002 Performance

Laboratory fridge-freezer with SmartFrost

This laboratory fridge-freezer combines maximum refrigeration performance with reliable temperature stability. It also complies with the ATEX Directive and is suitable for combustible substances that could form explosive atmospheres.

  • Exterior dimensions: height/width/depth - 204.4 / 59.7 / 65.4 cm

  • Adjustable temperature range - -9 °C to -30 °C

  • Total gross volume - 377 l

  • Energy consumption per year - 390 kWh/a

  • Total net volume - 261 l

Compliance with the ATEX Directive

Liebherr laboratory equipment conforms to EN/IEC 60079-0 or EN-IEC 60079-7 and complies with EU Directive 2014/34/EU (“ATEX Directive”). Classification of the interior to <Ex> II 3 G Ex ec IIC T6 (declared as Zone 22) makes them suitable for flammable substances in closed containers that could form explosive atmospheres.

SmartFrost

SmartFrost reduces frost build-up in the interior and on stored products. Defrosting is required less often – and when it is necessary, it is made much easier by the smooth, easy-to-clean interior walls. The evaporator in the foam insulation ensures high levels of energy efficiency as well as even cooling.

+2 °C SafetyDevice

If the temperature falls below +2 °C due to a malfunction while the temperature setting is at +5 °C or higher, the SafetyDevice takes control, stabilising the temperature, activating the alarm and protecting the contents from freezing. At colder settings, this activation threshold decreases relatively with the temperature setting.

Compliance with the ATEX Directive

Liebherr laboratory equipment conforms to EN/IEC 60079-0 or EN-IEC 60079-7 and complies with EU Directive 2014/34/EU (“ATEX Directive”). Classification of the interior to <Ex> II 3 G Ex ec IIC T6 (declared as Zone 22) makes them suitable for flammable substances in closed containers that could form explosive atmospheres.

SmartFrost

SmartFrost reduces frost build-up in the interior and on stored products. Defrosting is required less often – and when it is necessary, it is made much easier by the smooth, easy-to-clean interior walls. The evaporator in the foam insulation ensures high levels of energy efficiency as well as even cooling.

Retrofittable WiFi/LAN interface

This is how easy it is to network a Liebherr: With the retrofittable WiFi and LAN interface, appliances can be effortlessly connected to external systems, such as SmartMonitoring from Liebherr. With the digital monitoring solution, the storage temperature is controlled and documented conveniently and securely via the subsequently set up interface.

Mechanical lock

All professional Liebherr appliances in the Performance series are equipped with a mechanical lock with two keys for the storage of temperature-sensitive products. This way you can be sure that no unauthorised persons can access your stored goods.

Easy to clean interior

The plastic inside container is made of polystyrene: a fully recyclable, robust, and odourless plastic. Manufactured seamlessly from one piece, it has no hidden dirt traps and the large corners can be cleaned quickly and easily. The perfect combination of sustainability and hygiene.

Alarm relay
In the event of an alarm, the responsible control centre is informed immediately, usually through connection to the building control system. You can define in advance which alarms are to be forwarded, as well as set how long the forwarding remains active and whether a reminder should be sent after the alarm acknowledgement. This allows you to react immediately in critical situations.
Additional access port for calibration
An additional feedthrough can be retrofitted for regular calibrations or measurements. For this purpose, a hole is drilled for a cable inlet with a maximum diameter of 40 mm at a specially designated location.
Accurate 1-point calibration
The laboratory appliances with electronic controls have a 1-point calibration function for extremely accurate temperature control. This permits compensation between the set temperature and the actual internal temperature. The correction value can be adjusted in increments of 0.1 K.
Antibacterial lever handle
A benefit for users but a bane for germs: The easy-turn handle mechanism makes opening the door effortless. It contains special antimicrobial substances that reduce bacteria by up to 99.99%*. Regular and time-consuming disinfection is not necessary. This means the appliance is extremely safe even if many people have access to it. *According to ISO 22196:2011
Clear appliance information
All of the information about the appliance should be there exactly when you need it. That's why every Liebherr has its serial and service number as well as the model designation on the display, where it can be easily read. Frustrated searches or even having to clear the interior out to be able to read the information are now a thing of the past.
Intuitive menu navigation
Convenience at your fingertips: Read out the appliance status from the control panel integrated flush in the door without needing to open it. The menu guidance is self-explanatory and controlled by three touch buttons.

Model type
Laboratory fridge-freezer with SmartFrost
Classification
Performance
GTIN
9005382247655

Operating instructions

Dimensional drawing

CE-Certificate

Please note: Despite careful data maintenance, we reserve the right to make technical changes and there may be errors and deviations in the image and text content compared to the original appliance.