Mobile crane LTM 1120-4.2

LTM 1120-4.2

Mobile crane

LTM 1120-4.2 – There’s nothing more on 4!

Maximum performance on four axles, that is the concept of the LTM 1120-4.2, the most powerful 4-axle crane on the market. Its boom is the longest in this crane class and has extremely high lifting capacities when fully raised. This increases flexibility and saves transport costs, as this crane can tackle jobs which would normally require a 5-axle crane together with all the logistics work that involves. The crane is e.g. ideal for erecting radio masts or tower cranes and is also equipped with proven technology in the form of VarioBase® and VarioBallast®.

LICCON3

Compare

Max. load capacity - 120 t
120 t
Telescopic boom - 66 m
66 m
Max. hoist height - 91 m
91 m
Max. radius - 64 m
64 m
Number of axles - 4
4

LICCON3

Compare

What's inside

LICCON3:

The third generation of the LICCON control system takes the familiar crane control to a new level and features some impressive new technologies.

Powerful:

Low gross weight with a high lifting capacity of 135 US t / 120 t.

Telescopic boom:

217 ft / 66 metres long, making it the longest boom in this crane class.

Variable support:

VarioBase® support technology makes even higher lifting capacities possible, particularly over the outriggers.

Economical and flexible:

The mechanically adjustable VarioBallast® ballast system saves ballast on the one hand and enables easily access to narrow job sites on the other.

Wear-free manoeuvring:

The new DynamicPerform clutch module on the TraXon gearbox transmits engine power via integrated disks that are cooled by oil circulation.

Photo gallery

Technical data

Max. load capacity	120 t
at radius	3.00 m
Telescopic boom from	12.30 m
Telescopic boom up to	66.00 m
Lattice jib from	2.90 m
Lattice jib up to	26.00 m
Drive engine/make	Liebherr
Drive engine	6-Zylinder-Diesel
Drive engine/power	330 kW
Number of axles	4
Drive/Steering standard	8 x 6 x 8
Driving speed	85.00 km/h
Total ballast	31.00 t

Downloads

Technical Data - Mobile crane LTM 1120-4.2 [m/t]

PDF (4.1 MB)

Boom/jib combinations

Driving conditions

On-road driving

Jobsite driving

Ballast systems

Counterweight

VarioBallast: Counterweight radius

Technology

ECOmode

ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The crane control system calculates the perfect engine speed for the diesel engine.

ECOdrive

ECOdrive makes the mobile crane significantly more comfortable and quieter by reducing the engine speed. Faster gearshifting delivers greater dynamic and traction offroad. On the road, the torque from the Liebherr diesel engine is used efficiently to minimise fuel consumption.

Hillstart-Aid

Hillstart-Aid makes starting on gradients easier. Move off safely and easily without rolling backwards.

RemoteDrive

The RemoteDrive remote control enables the crane to be controlled from outside the driver’s cabin. This is not only possible during crane operations, but also whilst driving on the site. This delivers greater safety and comfort as the crane operator has a better view of problem areas as he can be right next to them. In other words, the operator can move himself to the areas with difficult access.

LICCON3

The third generation LICCON control system features the same time-tested operation as previous generations and adds a fast data bus, significantly more storage space and greater computing power. LICCON3 cranes are prepared for telematics and fleet management.

VarioBase®

VarioBase makes the crane’s support system variable. It enables each outrigger to be extended to a different length. This enhances safety – particularly in constricted spaces. And what's more, the crane’s lifting capacities are significantly increased, particularly over the outriggers and depending on the configuration.

MyLiebherr

Our customer portal MyLiebherr is your entrance to the Liebherr service world. It gives you access to extensive basic and additional services for your mobile and crawler cranes

MyLiebherr

Discover more

It's a matter of control

Liebherr presents a further crane model with the new LICCON3 control system: The LTM 1120-4.1 becomes the LTM 1120-4.2. The 4-axle 120-tonne crane is also characterised by the new future-oriented crane design.

Customer magazine

The magazine for customers and friends of mobile and crawler cranes. Here you will find some extraordinary crane impressions and stories!

Used cranes

Liebherr is also specialized in used mobile and crawler cranes. We ensure the safety and durability of the cranes by our global service network.

LTM 1120-4.2

Mobile crane

LTM 1120-4.2 – There’s nothing more on 4!

What's inside

Photo gallery

Technical data

Downloads

Boom/jib combinations

Boom/jib combinations

Driving conditions

On-road driving

Jobsite driving

Ballast systems

Counterweight

VarioBallast: Counterweight radius

Technology

ECOmode

ECOdrive

Hillstart-Aid

RemoteDrive

LICCON3

VarioBase®

VarioBallast® (mechanical)

AutoBallast

WindSpeed load charts

HVO ready

Assistance-systems

MyLiebherr

Discover more

Customer magazine

Used cranes

LTM 1120-4.2